Toro Reelmaster 03485, Руководство оператора

Страница: 2 / 24

WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical
or chemicals known to the State of
California to cause cancer, birth defects,
or reproductive harm.
This product complies with all relevant European
directives. For details, please see the Declaration of
Incorporation (DOI) at the back of this publication.
Introduction
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
You may contact Toro directly at www.Toro.com
for product safety and operation training materials,
accessory information, help finding a dealer, or to
register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
Figure 1
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
g027162
Figure 1
1. Location of the model and serial numbers
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(
Figure 2 ), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
g000502
Figure 2
1. Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Safety ....................................................................... 3
General Safety ................................................... 3
Safe Operating Practices.................................... 3
Safety and Instructional Decals .......................... 4
Setup ........................................................................ 5
1 Inspecting the Cutting Unit ............................... 5
2 Using the Kickstand ......................................... 5
3 Adjusting the Rear Shield................................. 6
4 Installing the Loose Parts ................................. 6
Product Overview ..................................................... 8
Specifications .................................................... 8
Attachments/Accessories ................................... 8
Operation .................................................................. 8
Making Adjustments ........................................... 8
Height-of-Cut Chart Terms................................ 10
Height-of-Cut Chart .......................................... 12
Maintenance ........................................................... 16
Lubricating the Machine.................................... 16
Relief-Grinding the Reel ................................... 16
Servicing the Bedknife ...................................... 17
Servicing the Bedbar ........................................ 18
Servicing the HD Dual Point Adjusters
(DPA) ............................................................ 19
Servicing the Roller........................................... 21
© 2018—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved