Toro Recycler 20332, Руководство оператора

Страница: 18 / 72

Figure 30
Important:
Position the curved ends of the blade
to point toward the mower housing.
6. Use a torque wrench to tighten the blade bolt to 82
N-m (60 ft-lb).
Important:
A bolt torqued to 82 N-m (60 ft-lb) is
very tight. While holding the blade with a block
of wood, put your weight behind the ratchet or
wrench and tighten the bolt securely. This bolt is
very difficult to overtighten.
Adjusting the Self-Propel Drive
Whenever you install a new self-propel cable or if the
self-propel drive is out of adjustment, adjust the self-propel
drive.
1. Turn the adjustment knob counterclockwise to loosen
the cable adjustment (
Figure 31 ).
g027709
Figure 31
1. Handle (left side) 3. Self-propel-drive cable
2. Adjustment knob
2. Adjust the tension on the cable ( Figure 31 ) by pulling it
back or pushing it forward and holding that position.
Note:
Push the cable toward the engine to increase
the traction; pull the cable away from the engine to
decrease the traction.
3. Turn the adjustment knob clockwise to tighten the
cable adjustment.
Note:
Tighten the knob firmly by hand.
18