Toro ProLine 30441, Руководство оператора, Страница: 15 / 64

15
Step Use Qty. Description
10
No parts needed – Setting up the hydro control linkage
11
Oil drain hose
Operator’s Manual
Engine Operator’s Manual
Safety Video
Parts Catalog
Registration card
1
1
1
1
1
1
Use for draining the engine oil
Read before operating machine
Read before operating machine
Watch before operating machine
Fill out and return to Toro
Step
1
Removing the Shipping
Bracket
Parts needed for this step:
None
Procedure
1. Remove the center gage wheel nut, 2 large washers,
angle bracket and 1 small washer (Fig. 2). Discard the
2 large washers and the angle bracket.
1
2
m–7585
3
3
4
5
Figure 2
1. Center Gage Wheels and
Spacer
2. Nut
3. Large washer—discard
4. Angle bracket—discard
5. Small washer
2. Install the center gage wheels with the previously
removed bolt, small washer and nut (Fig. 3).
1
2
3
4
4
m–6510
Figure 3
1. Center Gage Wheels and
Spacer
2. Nut
3. Bolt
4. Washer