Toro ProLine 20 HP 30611, Руководство оператора, Страница: 31 / 48

Maintenance
29
Fuel Filter
Service Interval/Specification
Replace the fuel filter after every 100 operating hours
or yearly, whichever occurs first.
Replacing the Fuel Filter
Never install a dirty filter if it is removed from the
fuel line.
1. Disengage the power take off (PTO), set the
parking brake, and turn the ignition key to
“OFF” to stop the engine. Remove the key.
2. Have a container ready to drain fuel from the
tank. It is best to change fuel filter when fuel
tank is almost empty.
3. Loosen hose clamps and slide them up the hose,
away from the filter (Fig. 26).
4. Remove the filter from the fuel lines (Fig. 26).
5. Install a new filter, if the filter has an arrow,
install with arrow pointing toward the carburetor.
6. Move the hose clamps close to the filter and
tighten.
2261
1
2
3
Figure 26
1. Hose clamp
2. Fuel line
3. Filter
Tire Pressure
Service Interval/Specification
Maintain the air pressure in the front and rear tires as
specified. Check the pressure at the valve stem after
every 50 operating hours or monthly, whichever
occurs first (Fig. 27). Check the tires when they are
cold to get the most accurate pressure reading.
Pressure: .103 kPa (15 psi) front and rear
1
Figure 27
1. Valve stem