Toro ProLine 20 HP 30611, Руководство оператора

Страница: 20 / 48

Operation
18
Parking Brake
Always set the parking brake when you stop the
machine or leave it unattended.
Setting the Parking Brake
1. Release pressure on the traction pedal to stop
movement.
2. Lift the parking brake lever up (Fig. 9) to apply
the parking brake.
Releasing the Parking Brake
1. Move the parking brake lever down (Fig. 9) to
the released the parking brake.
1
2
Figure 9
1. Parking brake 2. Implement lift lever
Implement Lift Lever
The implement lift lever (Fig. 9) is used to raise and
lower various attachments.
Note: When done using implement engage
lock bracket and tighen knob.
Raising Attachments
1. Remove pressure from traction pedal to stop the
machine.
2. Loosen the lock bracket knob. Move bracket
back and tighten knob (Fig. 10).
3. Pull implement lift lever (Fig. 9) rearward to
raise attachment to the desired height.
Lowering Attachments
1. Remove pressure from traction pedal to stop the
machine.
2. Loosen the lock bracket knob. Move bracket
back and tighten knob (Fig. 10).
3. Push implement lift lever (Fig. 9) forward to
lower attachment.
1
2
3
Figure 10
1. Lock Bracket
2. Implement lift lever
3. Knob