Toro Pro Force 44554, Руководство оператора

Страница: 9 / 36

1
Connecting the Battery
Parts needed for this procedure:
—
Grafo 112X grease (Toro Part No. 505-47)
Procedure
1. Remove the clips securing the battery cover to
the battery box (
Figure 3 ).
g029816
Figure 3
1. Battery cover 2. Battery clip
DANGER
Battery electrolyte contains sulfuric acid,
which is fatal if consumed and causes
severe burns.
• Do not drink electrolyte and avoid
contact with skin, eyes or clothing.
Wear safety glasses to shield your
eyes and rubber gloves to protect
your hands.
• Fill the battery where clean water is
always available for flushing the skin.
2. Attach the positive cable (red cable) to the
positive (+) terminal.
3. Attach the negative cable (black cable) to the
negative (-) terminal of the battery.
4. Coat the terminals and mounting fasteners with
Grafo 112X (skin over) grease (Toro Part No.
505-47) to prevent corrosion.
5. Install the battery cover and secure with the
clips.
2
Mounting the Hitch to the
Debris Blower
Parts needed for this procedure:
1 Debris blower assembly
1 Hitch
2 Bolt (3/8 x 3 inches)
2 Flange nut (3/8 inch)
1 Hitch clevis
2 Bolt (5/8 x 4–1/2 inch)
2 Locknut (5/8 inch)
Procedure
1. Position the debris blower on a flat, level surface.
2. Insert the hitch tube into the frame brackets
(
Figure 4 ). Secure the tube to the frame with 2
bolts (3/8 x 3 inches) and flange nuts (3/8 inch)
and torque to 40 N
⋅
m (30 ft-lb).
g007878
Figure 4
1. Frame brackets 3. Hitch clevis
2. Hitch tube
Note:
The hitch tube can be rotated 180
degrees to accommodate different hitch heights.
9