Maintenance
Note:
Determine the left and right sides of the machine from the normal operating position.
Note:
Download a free copy of the electrical or hydraulic schematic by visiting
www.Toro.com
and searching
for your machine from the Manuals link on the home page.
Important:
Refer to your engine owner's manual for additional maintenance procedures.
Maintenance Safety
•
Before cleaning, servicing, or adjusting the
machine, do the following:
– Park the machine on a level surface.
– Shut off the engine, remove the key, disconnect
the spark-plug wire, and wait for all moving
parts to stop.
– Chock the wheels.
– Remove the machine from the traction unit.
– Allow machine components to cool before
performing maintenance.
•
Perform only those maintenance instructions
described in this manual. If major repairs are
ever needed or you need assistance, contact an
authorized Toro distributor.
•
Support the machine with blocks or jack stands
when working beneath it.
•
Ensure that all guards are installed securely after
maintaining or adjusting the machine.
•
Do not allow untrained personnel to service the
machine.
•
Use jack stands to support the machine or
components when required.
•
Carefully release pressure from components with
stored energy.
•
Do not charge the batteries while servicing the
machine.
•
To reduce the potential fire hazard, keep the
engine area free of excessive grease, grass,
leaves, and accumulation of dirt.
•
If possible, do not perform maintenance while the
engine is running. Keep away from moving parts.
•
If you must run the engine to perform a
maintenance adjustment, keep your hands, feet,
clothing, and all other parts of your body away
from the engine and any moving parts. Keep
bystanders away from the machine.
•
Clean up oil and fuel spills.
•
Keep all parts in good working condition and all
fasteners tightened. Replace all damaged or
missing decals.
•
Do not interfere with the intended function of a
safety device or reduce the protection provided
by a safety device. Check their proper operation
regularly.
•
Do not overspeed the engine by changing the
governor settings. To ensure safety and accuracy,
have an authorized Toro distributor to check the
maximum engine speed with a tachometer.
•
If major repairs are ever necessary or assistance
is required, contact an authorized Toro distributor.
•
Altering this machine in any manner may affect the
operation of the machine, performance, durability,
or its use may result in injury or death. Such
use could void the product warranty of The Toro
Company.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first 8 hours
• Check the condition and the tension of the belt.
After the first 10 hours
• Check the torque of the wheel lug nuts.
Before each use or daily
• Check the engine oil level.
• Clean the engine screen and the oil cooler.
• Check the nozzle clamp and the nozzle guides.
Every 25 hours
• Clean the foam air filter element and check the paper element for damage (more
frequently if conditions are dusty or sandy).
Every 50 hours
• Check the condition and the tension of the belt.
19
Содержание Pro Force 44554
Страница 32: ...Notes...
Страница 36: ......
