Toro Multi Pro ExcelaRate 5800-G, Руководство оператора

Страница: 72 / 88

Changing the Pressure
Filter
Service Interval: Every 400 hours
1. Move the machine to a level surface, shut off the
sprayer pump, shut off the engine, and remove
the key from the starter switch.
2. Align a drain pan under the pressure filter
(
Figure 91 ).
g028235
Figure 91
1. Filter head 4. Bowl
2. O-ring (bowl) 5. O-ring (drain plug)
3. Filter element 6. Drain plug
3. Rotate the drain plug counterclockwise and
remove it from the bowl of the pressure filter
(
Figure 91 ).
Note:
Allow the bowl to drain completely.
4. Rotate the bowl counterclockwise and remove it
from its filter head (
Figure 91 ).
5. Remove the old pressure-filter element ( Figure
91 ).
Note:
Discard the old filter.
6. Check the O-ring for the drain plug (located
inside the bowl) and the O-ring for the bowl
(located inside the filter head) for damage and
wear (
Figure 91 ).
Note:
Replace any damaged or worn O-rings
for the plug, bowl, or both.
7. Install the new pressure-filter element into the
filter head (
Figure 91 ).
Note:
Ensure that the filter element is firmly
seated into the filter head.
8. Install the bowl onto the filter head hand tight
(
Figure 91 ).
9. Install the plug into the bowl hand tight ( Figure
91 ).
72