Toro LT2240, Руководство оператора

Страница: 39 / 68

Engine Maintenance
Engine Safety
•
Shut off the engine before checking the oil or
adding oil to the crankcase.
•
Do not change the governor speed or overspeed
the engine.
Checking the Engine
Overheat Warning System
Service Interval: Every 100 hours
1. Prepare the machine for maintenance; refer to
Preparing the Machine for Maintenance (page
35)
.
2. Unlatch and open the hood.
3. Turn the ignition key to the ignition R
UN
position.
Note:
Do not start the engine.
4. At the left side of the engine, disconnect
the red/blue wire terminal from the engine
temperature switch (
Figure 60 ).
g348369
g014437
Figure 60
1. Temperature switch
5. Touch the metal terminal of this wire onto a
suitable earth point, ensuring that the metal
surfaces make good contact.
Note:
The horn sounds and the engine coolant
temperature warning light illuminates to confirm
operation.
Important:
If the system is malfunctioning,
make repairs before operating the mower.
6. Turn the ignition key to the ignition S
TOP
position, and remove the key.
7. Close and latch the hood.
Checking the Air
Filter-Blockage Indicator
Service Interval: Before each use or daily
1. Prepare the machine for maintenance; refer to
Preparing the Machine for Maintenance (page
35)
.
2. Unlatch and open the hood.
3. Check the air filter-blockage indicator ( Figure
61 ).
Important:
If the indicator is red, inspect the
primary air filter and replace it if it is dirty or
damaged; refer to
Replacing the Primary Air
Filter (page 40) .
g348379
Figure 61
1. Filter-blockage indicator
4. If the filter-blockage indicator is not red, close
the hood.
5. Close and latch the hood.
39