Transmission Neutral Indicator Light
The transmission neutral indicator light illuminates
when the traction pedals are in the N
EUTRAL
position
and the ignition key is turned to the R
UN
position
(
).
Note:
You must engage the parking brake for the
transmission neutral indicator light to illuminate.
g348167
Figure 17
1.
Transmission neutral indicator light
Engine Preheat Indicator Light
Turn the ignition key to position P
REHEAT
. The
engine preheat indicator light illuminates and the
glow plugs energize to help start a cold engine.
).
Important:
Attempting to start a cold engine
before using the preheat may cause unnecessary
battery wear.
g348166
Figure 18
1.
Engine pre-heat indicator light
Traction Pedals
Forward travel:
Press the forward traction pedal
to drive the machine forward and increase ground
speed. Release the pedal to reduce ground speed
(
).
Reverse travel:
Press the reverse traction pedal to
drive the machine backward and increase ground
speed. Release the pedal to reduce ground speed
(
).
Stop (Neutral):
To stop the machine, use 1 of the
following procedures:
•
Reduce your foot pressure on the traction pedal
and allow it to return to the neutral position. The
machine dynamically brakes to a smooth stop.
•
Tap or hold the opposite pedal briefly—this stops
the machine faster than dynamic braking.
g014420
Figure 19
1.
Reverse traction pedal
2.
Forward traction pedal
Adjustable Steering Column
Adjust the steering wheel and column only when the
machine is parked on level ground.
1.
To tilt the steering wheel, press the foot pedal
down.
2.
Position the steering tower to the most
comfortable position and release the pedal
(
).
13
