Toro Lawn-Boy Precision Z320H, Руководство по обслуживанию

Страница: 63 / 72

44” MOWER DECKS
TimeCutter
“
Z Service Manual 6 - 11
6
9. Install the belt covers over the outside spindles.
Figure 108
m-7263
Removing the Mower
Note: Before removing the mower, make a note for
which holes are used in the leveling brackets (Figure
110).
1. Park the machine on a level surface and
disengage the blade control (PTO).
2. Move the motion control levers to the brake
position, stop the engine, remove the key, and
wait for all moving parts to stop before leaving the
operating position.
3. Lower the height-of-cut lever to the lowest
position.
4. Remove the hairpin cotter and clevis pin from the
front support rod on each side of the mower
(Figure 109).
Figure 109
m-6431
5. Remove the hairpin cotter and washer from the
adjusting rod (Figure 110) on each side of the
mower.
(1) Mower belt
(2) Idler arm
(3) Outside pulley
(4) Spring (5) Engine pulley
(6) Belt cover
(7) Belt guide
(1) Hairpin cotter and clevis pin (2) Support rod