Toro Lawn-Boy Precision Z320H, Руководство по обслуживанию

Страница: 26 / 72

CHASSIS
3 - 8 TimeCutter
“
Z Service Manual
Belt Installation
1. Install belt around the upper groove of the engine
drive pulley and then around the right side
transaxle pulley. Install idler spring to the front
spring bracket (Figure 26).
Figure 26
mvc-091
2. Install the second drive belt around the left side
transaxle pulley and then work it around the
engine drive pulley. Install idler spring to the rear
spring bracket (Figure 27).
Figure 27
mvc-093
3. Apply anti-seize lubricant on the crankshaft and
install the electric PTO clutch on the engine
crankshaft; make sure the slot on the clutch goes
into the clutch stop bracket.
NOTE: Loctite 242 should be applied to the threads of
the clutch bolt before installing. Torque the clutch bolt
to 50 - 60 ft. lbs. Reinstall the electrical plug
connection into the clutch.
Figure 28
mvc-094
4. Install the mower drive belt around the electric
PTO clutch.
5. Reconnect the negative battery cable and turn the
fuel ON at the fuel valve, located under the fuel
tank.
3