Toro Groundsmaster 3300 Series, Руководство оператора

Страница: 60 / 68

Cab Maintenance
Cleaning the Cab
Important:
Use care around the cab seals ( Figure
75 ). If you are using a pressure washer, keep the
washer wand at least 0.6 m (2 ft) away from the
machine. Do not use the pressure washer directly
on the cab seals or under the rear overhang.
g303806
Figure 75
1. Seal 3. Do not pressure wash
under the rear overhang.
2. Keep wand 0.6 m (2 ft)
away.
Cleaning the Cab Air Filters
Service Interval: Every 400 hours
1. Remove the knobs and grates from the cab rear
overhang (
Figure 76 ).
g251432
Figure 76
1. Filter 3. Grate
2. Knob
2. Remove the air filters from the cab.
3. Clean the filters by blowing clean, oil-free,
compressed air through them.
Important:
If either filter has a hole, tear, or
other damage, replace the filter.
4. Use the knobs and grates to install the filters
into the cab (
Figure 76 ).
Cleaning the Cab
Condenser Filter
The purpose of the cab condenser filter is to prevent
large debris, such as grass and leaves, from entering
the cab condenser and condenser fans.
1. Pull the screen cover straight down.
2. Clean the condenser filter with water.
Note:
Do not use a pressure washer.
Important:
If the filter has a hole, tear, or
other damage, replace the filter.
3. Allow the filter to dry before installing it into the
machine.
4. Rotate the filter screen around the tabs until
the latch locks into the latch-mount assembly
(
Figure 77 ).
60