Toro GreensPro 1260, Руководство оператора

Страница: 22 / 36

Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first 5 hours
• Check for any loose nuts, bolts, or fittings and tighten them as required.
After the first 20 hours
• Change the engine oil.
• Change the hydraulic fluid and filter.
Before each use or daily
• Check the hydraulic hoses and fittings.
• Check the level of the engine oil.
• Check the level of the hydraulic fluid.
• Check the tire pressure in the transport wheels.
• Check the safety-interlock system.
• Lubricate the drive-roller bearing (lubricate immediately after washing).
• Check the air cleaner.
• Ensure that the parking brake prevents the machine from rolling when it is parked.
• Check for any loose nuts, bolts, or fittings and tighten them as required.
• Check the fuel tank for fuel.
After each use
• Clear any debris on the roller, especially from around the engine.
Every 50 hours
• Clean the air cleaner (more often in dirty or dusty conditions).
Every 100 hours
• Change the engine oil.
• Check/adjust the spark plug.
• Clean the sediment cup.
Every 300 hours
• Replace the paper element.
• Replace the spark plug.
• Check and adjust the valve clearance.
Every 400 hours
• Change the hydraulic fluid and filter.
Before storage
• Paint chipped surfaces.
Yearly
• Check over the entire machine, including ensuring that all nuts and bolts are tight.
Important:
Refer to your engine owner's manual for additional maintenance procedures.
Note:
To obtain an electrical schematic or a hydraulic schematic for your machine, visit www.Toro.com.
22