Toro GreensPro 1260, Руководство оператора

Страница: 12 / 36

connected so that they cannot both be pressed down
at the same time, you can press only 1 pedal at a
time. If you press down the right pedal, the machine
moves to the right, and if you press down the left
pedal, the machine moves to the left. The further you
press a pedal, the faster your speed in that direction.
Note:
Come to a full stop before changing the
direction of the machine; do not abruptly change the
pedal direction. Doing so overstresses the traction
drive line, resulting in premature failure of drive-line
components. Actuate the pedals slowly and smoothly
to avoid potential turf scuffing damage as well as
drive-line component damage.
When operating the machine on hills, ensure that
the drive roller is on the downhill side for adequate
traction. Failure to do so may result in turf damage.
Hitch Assembly
Use the hitch assembly ( Figure 10 ) to tow the machine
and to lower/raise the transport wheels.
Seat-Adjustment Lever
You can move the seat forward or backward. Rotate
the seat-adjustment lever (
Figure 10 ) upward and
slide the seat forward or backward, then release the
lever.
Armrest-Adjustment Bolts
You can adjust each armrest by turning the respective
adjustment bolt (
Figure 13 ).
g038454
Figure 13
1. Adjustment bolt
Light Switch
Use the light switch to turn the lights on and off ( Figure
10 ).
Hour Meter
The hour meter ( Figure 10 ) indicates the total hours of
machine operation.
Engine Controls
On/Off Switch
The On/Off switch ( Figure 14 ) allows the operator of
the machine to start and shut off the engine. This
switch is located on the front of the engine. Rotate the
On/Off switch to the O
N
position to start and run the
engine. Rotate the On/Off switch to the O
FF
position
to shut off the engine.
g021103
Figure 14
1. O
FF
position 2. O
N
position
Choke Lever
The choke lever ( Figure 15 ) is required when starting
a cold engine. Before pulling the recoil-start handle,
move the choke lever to the
CLOSED
position. Once
the engine is running, move the choke lever to the
OPEN
position. Do not use the choke if the engine is
already warmed up or if the air temperature is high.
12