Toro GreensPro 1240, Руководство по обслуживанию

Страница: 27 / 186

Hydraulic O-Ring Kit
Toro Part No. 117-2727
This kit includes O-rings in a variety
of sizes for the face seal and port seal
hydraulic connections. To help prevent a
hydraulic leak, replace the O-rings when
you open the hydraulic connection.
Hydraulic Hose Kit
Toro Part No. TOR6007
This kit includes the fittings and hoses that
are used to connect high flow hydraulic
filter kit (TOR6011) to the machine
hydraulic traction system components.
High Flow Hydraulic Filter Kit
Toro Part Number: TOR6011
The high flow hydraulic filter kit is designed with
large flow 150 lpm(40 gpm) and high pressure
(34,500 kPa or 5,000 psi) capabilities. This kit
provides for bidirectional filtration which prevents
filtered unwanted material from entering into the
circuit regardless of the flow direction.
If a component failure occurs in the closed-loop
traction circuit, contamination from the damaged
part will remain in the circuit until you remove it.
Install a high flow hydraulic fluid filter into the circuit
when you connect the hydraulic test gauges in
order to test the traction circuit components or after
you replace a failed traction circuit component (e.g.,
piston pump or wheel motor). This filter removes
contamination from the hydraulic fluid in the traction
circuit, thereby preventing additional component
damage. Refer to
Filtering the Closed-Loop
Traction Circuit (GreensPro 1260) (page 5–39)
Note: This kit does not include the hydraulic hoses;
refer to Hydraulic Hose Kit (page 2–13)
Note: The replacement filter element is Toro
Part No. TOR6012. The filter element canister
tightening torque is
34 N∙m (25 ft-lb) .
GreensPro ™ 1240/1260 Page 2–13 Specifications and Maintenance: Special Tools
14211SL Rev A