g334747
Figure 13
1.
Nut
4.
Washer (2)
2.
Cable
5.
Cable plate
3.
Shoulder bolt
8.
Secure the cable in the chute-cable bracket.
g340720
Figure 14
1.
Cable is tight when height-of-cut is in transport position.
9.
Raise the height-of-cut lever and lock it into the
highest (transport) position.
g340768
Figure 15
10.
Slide the bracket forward so that the cable is
tight (
).
11.
Tighten the fasteners securing the bracket.
6
Installing the High Flow
Case Drain Kit
Parts needed for this procedure:
1
High Flow Case Drain Kit
Procedure
Refer to the
Installation Instructions
for the kit.
7
Connecting the Hoses
No Parts Required
Procedure
1.
Connect the hoses from the snowthrower
cylinder to the hoses from the low flow assembly.
9
