Toro GrandStand Multi Force 78598, Руководство оператора

Страница: 14 / 20

Selecting a Trailer
WARNING
Loading a machine onto a trailer or truck
increases the possibility of tip-over and could
cause serious injury or death (
Figure 24 ).
• Use only a full-width ramp; do not use
individual ramps for each side of the
machine.
• Ensure that the length of ramp is at least 4
times as long as the height of the trailer or
truck bed to the ground.
g229507
Figure 24
1. Full-width ramp in stowed
position
3. H=height of the trailer or
truck bed to the ground
2. Ramp is at least 4 times
as long as the height of
the trailer or truck bed to
the ground 4. Trailer
Loading the Machine
WARNING
Loading a machine onto a trailer or truck
increases the possibility of tip-over and could
cause serious injury or death.
• Use extreme caution when operating a
machine on a ramp.
• Load and unload the machine with the
heavy end up the ramp.
• Avoid sudden acceleration or deceleration
while driving the machine on a ramp as
this could cause a loss of control or a
tip-over situation.
1. If using a trailer, connect it to the towing vehicle
and connect the safety chains.
2. If applicable, connect the trailer brakes and
lights.
3. Lower the ramp ( Figure 24 ).
4. Raise the platform.
Important:
Always keep the platform up
when loading and unloading the machine.
5. Load the machine onto the trailer with the heavy
end up the ramp (
Figure 25 ).
•
If the attachment is installed, load the
machine with the front up the ramp.
•
If the attachment is not installed, load the
machine with the rear up the ramp.
g309366
Figure 25
1. Machine with
attachment—load the
machine with the front up
the ramp. 2. Machine with mower only
or no attachment—load
the machine with the rear
up the ramp.
6. Shut off the engine, remove the key, and engage
the parking brake.
7. Tie down the machine near the front caster
wheels and the rear bumper with straps, chains,
cable, or ropes (
Figure 26 ). Refer to local
regulations for tie-down requirements.
14