Controls
Use the switches from the Low Flow Hydraulic Kit
(
) and the height-of-cut lever to operate the
snowthrower.
Low Flow Hydraulic Kit Switches
•
Move the left switch up or down to raise or lower
the snowthrower.
•
Move the right switch left or right to angle the
discharge chute.
g037041
Figure 21
1.
Raise or lower the
snowthrower
2.
Angle the discharge chute
left or right.
Power-Takeoff Switch (PTO)
Use the power-takeoff switch (PTO) to start and stop
the attachment.
Height-of-Cut Lever
Use the height-of-cut lever to raise and lower the
snowthrower deflector.
Operation
Operating the Snowthrower
Important:
Raise the snowthrower when
transporting it.
1.
Start the machine.
2.
Move the throttle lever midway between the
F
AST
and S
LOW
positions.
Note:
In cold conditions, the traction unit engine
may need time to warm up prior to engaging the
attachment.
3.
Engage the PTO switch to start the snowthrower
auger.
4.
Move the throttle lever to the F
AST
position
before clearing snow.
5.
Disengage the PTO switch or release the
motion-control levers to stop the snowthrower
auger.
Note:
The auger should spin counterclockwise when
viewed from the left side from the operating position
(
). If the auger spins in the wrong direction,
switch the couplers on the hydraulic hoses connected
to the High Flow Kit.
g330393
Figure 22
12
