g329851
Figure 35
1.
Wing nut (2)
3.
Cover
2.
Spacer
4.
Bolt (2)
4.
Loosen the nut.
g329850
Figure 36
1.
Sprocket
3.
Nut
2.
Shoulder bolt
5.
Using a closed-end wrench, pull the nut to apply
tension to the chain, and tighten the bolt using
a socket wrench.
Note:
Ensure that the chain is tight but does
not bind.
Important:
If you remove the shoulder bolt,
apply anti-seize compound to the bolt before
installing it.
6.
Tighten the nut.
7.
Install the cover as shown in
.
Storage
1.
Before long term storage, wash the attachment
with mild detergent and water to remove dirt and
grime.
2.
Check the condition of the scraper blade.
3.
Check and tighten all bolts, nuts, and screws.
Repair or replace any damaged or worn parts.
4.
Paint all scratched or bare metal surfaces. Paint
is available from your Authorized Service Dealer.
5.
Store the attachment in a clean, dry garage or
storage area. Cover it to protect it and keep it
clean.
19
