G015595
Figure 68
48 and 52 inch mower decks
1.
6-1/2 inches (165 mm)
from hook to hook
4.
Ratchet
2.
Spring
5.
Square hole for ratchet
3.
Spring loaded idler
6.
Nut
6 5
g017890
Figure 69
60 inch mower decks
1.
6-1/2 inches (165 mm)
from hook to hook
4.
Ratchet
2.
Spring
5.
Square hole for ratchet
3.
Spring loaded idler
6.
Nut
Replacing the Pump Drive Belt
Service Interval:
Every 100 hours—Check the pump drive
belt.
1.
Disengage the PTO and set the parking brake.
2.
Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3.
Remove the mower deck belt.
4.
Tilt the machine on it's back. Refer to Pre-Maintenance
at the beginning of the Maintenance Section.
5.
Remove the shoulder bolt, nut and washer from the
engine deck and connected to the spring (Figure 70).
46
Содержание GrandStand 74549
Страница 64: ...G015606 Electrical Schematic for 48 inch Mower Models Rev A 64 ...
Страница 65: ...g018174 Electrical Schematic for 52 and 60 inch Mower Models Rev A 65 ...
Страница 66: ...Notes 66 ...
Страница 67: ...Notes 67 ...
