Toro GrandStand 74549, Руководство оператора

Страница: 21 / 68

•
Mowing most areas
•
Driving across slopes
•
Driving down slopes
To lower the platform, push the platform forward against the
cushion to release pressure on the latch pin and then pull the
knob out and lower the platform.
G015233
Figure 20
1. Platform up 3. Pull the knob out to release
the platform
2. Platform down
Driving Forward or Backward
The throttle control regulates the engine speed as measured
in rpm (revolutions per minute). Place the throttle control in
the fast position for best performance. Always operate in the
full throttle position when mowing.
CAUTION
Machine can spin very rapidly. Operator may lose
control of machine and cause personal injury or
damage to machine.
Slow the machine down before making sharp turns.
Driving Forward
1. Release the parking brake; refer to Releasing the
Parking Brake in Operation.
2. Move the right side motion control lever to the center,
un-locked position.
G015234
4
5
1
2
3
3 4
Figure 21
1. Front reference bar 4. Right control lever
2. Left control lever 5. Right control lever in the
neutral lock position
3. Rear reference bar
3. To go forward, move the speed control lever to the
desired speed.
4. Slowly push the motion control levers forward
(Figure 22).
Note:
The engine will kill if a motion control lever is
moved with the parking brake engaged.
The farther you move the motion control levers in
either direction, the faster the machine will move in
that direction.
To stop, pull the motion control levers back to the
neutral position.
21