Figure 36
1.
Remove battery
2.
With two people, lift the
front end of the mower
(ensure the platform is up)
Release the Cushion for Rear
Access
The cushion can be released for rear access to the machine
for maintenance or adjustment.
1.
Lower the platform.
2.
Remove the hairpin cotter pins on each side of the
cushion.
3.
Slide the large washers with plastic bushings to the
inside.
4.
Remove the cushion and lower it to the platform.
5.
Perform any maintenance or adjustment on the
machine.
6.
Raise the cushion and slide it onto the pins on both
sides of the machine (Figure 37).
7.
Slide the large washers plastic bushings into the
cushion bracket and secure them with a hairpin cotter
pin (Figure 37).
g019209
Figure 37
1.
Plastic bushing with large
washer
3.
Hairpin cotter pin
2.
Cushion bracket with key
hole
29
Содержание GrandStand 74549
Страница 64: ...G015606 Electrical Schematic for 48 inch Mower Models Rev A 64 ...
Страница 65: ...g018174 Electrical Schematic for 52 and 60 inch Mower Models Rev A 65 ...
Страница 66: ...Notes 66 ...
Страница 67: ...Notes 67 ...
