Toro CT2120 30655, Руководство оператора

Страница: 25 / 64

G014425
Figure 32
WARNING
Always ensure that the grass deflectors are angled
below horizontal level, otherwise risks to health
and safety may result.
Height of cut gauge: An optional height of cut
gauge is available to assist in achieving accurate cut
height settings. It is suitable for both fixed and floating
cutterheads (Figure 33).
G014426
Figure 33
MK3 Fixed cutterhead 8 inch
(20 cm)
Pivot knuckle fixing: Secure the bolt in the front fixed
hole position in Figure 34 as shown.
1
G014427
Figure 34
1. Front fixed hole position
Height of cut adjustment: The height of cut is gauged
by the position of the rear roller. Turn the adjusting nut
assembly both ends clockwise to decrease height of cut
or anti-clockwise to increase height of cut (Figure 35).
2
1
G014428
Figure 35
1. Adjusting nut assembly
Important:
Do not attempt to unlock the nut
assemblies.
Ensure that all cutterheads are set at the same height of
cut by either referring to the indicator rings (Figure 36 )
25