Toro CCR 6053 ES Quick Clear, Руководство оператора

Страница: 11 / 24

Figure 18
Important:
Run the electric starter no more
than 10 times at intervals of 5 seconds on, then
5 seconds off. Running the electric starter
extensively can overheat and damage it. If the
engine does not start after this series of attempts,
wait at least 40 minutes to allow the starter to
cool before attempting to start it again. If the
engine does not start after the second series of
attempts, take the machine to an Authorized
Service Dealer for service (model 38569 only).
Note:
If you pull the recoil handle and feel no
resistance, the starter may be frozen. Thaw out the
starter before attempting to start the machine.
5. While the engine is running, push in the choke lever
slowly.
6. Unplug the extension cord from the power source
and the machine (model 38569 only).
CAUTION
If you leave the machine plugged into a power
source, someone can inadvertently start the
machine and injure people or damage property
(model 38569 only).
Unplug the power cord whenever you are not
starting the machine.
Engaging the Rotor Blades
To engage the rotor blades, hold the control bar against
the handle (Figure 19).
Figure 19
1. Control bar
Disengaging the Rotor Blades
To disengage the rotor blades, release the control bar
(Figure 20).
Figure 20
Stopping the Engine
To stop the engine, turn the ignition key counterclockwise
to the Off position (Figure 21).
Figure 21
11