Toro 79485, Руководство по установке, Страница: 7 / 16

3
Installing the Pod Brackets
and Seat Belt
MyRide-Equipped Machines Only
Parts needed for this procedure:
1 Left seat belt bracket (MyRide machines only)
1 Right seat belt bracket (MyRide machines only)
2 Partial-thread bolt (3/8 x 2 inches)
2 Small washer
2 Locknut (3/8 inch)
1 Left pod bracket
1 Bumper
1
Right pod bracket (MyRide machines only)
3 Thread-forming screw (5/16 x 3/4 inch)
1 Seat belt tongue assembly
1 Seat belt buckle assembly
2 Carriage screw (7/16 x 1 inch)
2 Locknut (7/16 inch)
Procedure
1. Install the seat belt brackets to the seat platform
with 2 partial-thread bolts (3/8 x 2 inches), 2
small washers, and 2 locknuts (3/8 inch) as
shown in
Figure 7 .
g310258
Figure 7
1. Partial-thread bolts (3/8 x
2 inches) 4. MyRide platform
2. Small washer 5. Locknut (3/8 inch)
3. Seat belt bracket
2. Install the bumper to the left pod bracket ( Figure
8 ).
g310245
Figure 8
1. Bumper
7