
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine.
Left ROPS mount
1
Right ROPS mount
1
Bolt (1/2 x 1-1/4 inches)
6
Large washer
6
Locknut (1/2 inch)
6
Belt guard panel
2
Rear guard panel
1
Cable tie
2
Narrow push rivet
4
2
Wide push rivet
2
Install the ROPS mounts and guard
panels.
Left seat belt bracket (MyRide machines
only)
1
Right seat belt bracket (MyRide
machines only)
1
Partial-thread bolt (3/8 x 2 inches)
2
Small washer
2
Locknut (3/8 inch)
2
Left pod bracket
1
Bumper
1
Right pod bracket (MyRide machines
only)
1
Thread-forming screw (5/16 x 3/4 inch)
3
Seat belt tongue assembly
1
Seat belt buckle assembly
1
Carriage screw (7/16 x 1 inch)
2
3
Locknut (7/16 inch)
2
Install the pod brackets and seat belt
brackets (MyRide-equipped machines
only).
Seat belt tongue assembly
1
Seat belt buckle assembly
1
Carriage screw (7/16 x 1 inch)
2
Locknut (7/16 inch)
2
Seat belt bracket (machines without
MyRide only)
2
Bolt (3/8 x 1 inch)
4
Locknut (3/8 inch)
4
Left pod bracket
1
Bumper
1
Right pod bracket (machines without
MyRide only)
1
4
Thread-forming screw (5/16 x 3/4 inch)
4
Install the pod brackets and seat belt
brackets (machines without MyRide
only).
2