Toro 79485, Руководство по установке, Страница: 4 / 16

1
Preparing the Machine
No Parts Required
Procedure
Note:
Determine the left and right sides of the
machine from the normal operating position.
Note:
You may discard all removed parts unless
otherwise noted.
1. Park the machine on a level surface.
2. Disengage the blade-control switch.
3. Move the motion-control levers outward to the
NEUTRAL
-
LOCK
position to engage the parking
brake.
4. Shut off the engine and remove the key.
5. Raise the seat, refer to your machine Operator’s
Manual .
6. Raise the rear of the machine on jack stands;
refer to your machine
Operator’s Manual .
WARNING
Supporting the machine on the lower
muffler shield (
Figure 1 ) may damage
the shield and cause the machine to fall,
injuring you or bystanders.
Do not use the lower muffler shield to
support the machine.
g299647
Figure 1
1. Lower muffler shield
7. Remove the rear tires as shown in Figure 2
Note:
Retain all wheel components for later
installation.
g309984
Figure 2
4