Installation Instructions
EN-2
3.
Two shoulder bolts on the housing protrude
through slotted holes in the cover plate and do
not have to be loosened or removed (Fig. 2).
Cover plate moves over the shoulder bolt heads.
4.
Slide cover plate counterclockwise to remove.
995
1
Figure 2
1.
Shoulder bolts
5.
Place front corner of chute baffle into deck
opening. Rotate chute counterclockwise and
push down into deck opening (Fig. 3 & 4).
m-1073
1
Figure 3
1.
Chute baffle
m-1129
1
3
2
Figure 4
1.
Chute baffle
2.
Front deck baffle
3.
Toe guard
Note:
The chute baffle must go behind the
front deck baffle and between blade
and toe guard to prevent contact with
blade.
6.
Insert chute support rod through hole in right
side of deck bracket (Fig. 5).
m-1013/2035
1
2
Figure 5
1.
Chute support rod
2.
Screw