Toro 58630, Руководство оператора

Страница: 8 / 77

Assembling the Auger
1. Insert the output shaft on the powerhead into the
open end of the auger (
Figure 3 ).
2. Secure the powerhead to the auger using the
bolt (3/8 x 1-1/2 inches) and locknut (3/8 inch)
as shown in
Figure 3 .
3. Secure the fishtail point to the auger ( Figure 3 ).
g356736
Figure 3
1. Output shaft on the
powerhead 4. Auger
2. Locknut (3/8 inch) 5. Fishtail point
3. Bolt (3/8 x 1-1/2 inches)
6