Toro 46450, Руководство оператора

Страница: 21 / 32

Greasing the Attachment
Service Interval: After the first 20 hours
After each use
Every 50 hours Grease the bearings and
bushings after cleaning the machine.
The attachment has grease fittings that you must
lubricate regularly with No. 2 lithium grease. Also,
lubricate the attachment immediately after every
washing and after long periods without use.
Grease the machine at the following bearing locations
(
Figure 27 ).
g346327
Figure 27
Grease the PTO driveshaft at the following locations
(
Figure 28 ).
g007309
Figure 28
Checking the Gearbox
Lubrication
Service Interval: Before each use or daily—Check
the gearbox oil level.
After the first 20 hours—Check the gearbox oil
level.
After the first 20 hours—Check the gearbox for
leaks.
Every 50 hours—Check the gearbox oil level.
Every 50 hours—Check the gearbox for leaks.
Allow the gearbox to cool before checking the
lubrication.
1. Clean debris from the fill plug to avoid
contamination (
Figure 29 ).
2. Remove the fill plug to relieve trapped air.
3. Remove the socket-head bolt on the rear of the
gearbox.
4. If no fluid spills out, add more fluid until it comes
out.
5. Install the socket-head bolt on the rear of the
gearbox (
Figure 29 ).
6. Install the fill plug.
g351200
Figure 29
1. Gearbox 3. Socket-head bolt
2. Fill plug
21