Loading
The weight of the cargo can change the sprayer center
of gravity and sprayer handling. To avoid loss of control
and personal injury, follow these guidelines:
•
Reduce the weight of the load when operating
on hills and rough terrain to avoid tipping or
overturning of the sprayer.
•
Liquid loads can shift. This shifting happens most
often while turning, going up or down hills, suddenly
changing speeds, or while driving over rough
surfaces. Shifting loads can cause the sprayer to tip
over.
•
When operating with a heavy load, reduce your
speed and allow for sufficient braking distance. Do
not suddenly apply the brakes. Use extra caution on
slopes.
•
Be aware that heavy loads increase your stopping
distance and reduce your ability to turn quickly
without tipping over.
Maintenance
•
Only permit qualified and authorized personnel to
maintain, repair, adjust, or inspect the sprayer.
•
Before servicing or making adjustments to the
machine, stop the engine, set the parking brake,
and remove the key from the ignition to prevent
someone from accidentally starting the engine.
•
To make sure that the entire machine is in good
condition, keep all nuts, bolts, and screws properly
tightened.
•
To reduce the potential for fire, keep the engine
area free of excessive grease, grass, leaves, and
accumulation of dirt.
•
Never use an open flame to check the level or
leakage of fuel or battery electrolyte.
•
If the engine must be running to perform a
maintenance adjustment, keep your hands, feet,
clothing, and any parts of your body away from the
engine and any moving parts. Keep everyone away.
•
Do not use open pans of fuel or flammable cleaning
fluids when cleaning parts.
•
Do not adjust
the ground speed governor. To
ensure safety and accuracy, have an Authorized Toro
Distributor check the ground speed.
•
Keep your body and hands away from pin hole
leaks or nozzles that eject high pressure fluid. Use
cardboard or paper to find leaks. Fluid escaping
under pressure can penetrate skin and cause injury
requiring surgery within a few hours by a qualified
surgeon or gangrene may result.
•
If major repairs are ever needed or assistance is
required, contact an Authorized Toro Distributor.
•
To be sure of optimum performance and safety,
always purchase genuine Toro replacement parts and
accessories. Replacement parts and accessories made
by other manufacturers could be dangerous. Altering
this sprayer in any manner that may affect sprayer
operation, performance, durability, or its use, may
result in injury or death. Such use could void the
product warranty.
Sound Pressure
This unit has a maximum sound pressure level at the
operator’s ear of 82 dBA, based on measurements of
identical machines per ISO 11201.
Vibration
This unit does not exceed a hand/arm vibration level of
2.5 m/s
2
, based on measurements of identical machines
per EN 1033.
This unit does not exceed a whole body vibration
level of 0.5 m/s
2
, based on measurements of identical
machines per EN 1032.
7
Содержание 41179
