Toro 31598N, Руководство оператора

Страница: 15 / 68

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Remove the side deck straps and brace
Deck cover R.H. 1
Deck cover L.H. 1
2
V-Belt 2
Lower the front deck winglets
3
No parts required
–
Level the front center deck
4
No parts required
–
Level the winglet decks to the front
center deck
5
No parts required
–
Check the tire pressure
6
No parts required
–
Check the fluid levels
7
No parts required
–
Grease the machine.
Media and Additional Parts
Description Qty. Use
Operator's Manual 1
Engine Operator's Manual 1
Operator Training Material 1
Provide the operator with information on the use and
maintenance of the machine
Parts Catalog
1
Ordering parts
Declaration of Conformity 1
Note:
Determine the left and right sides of the machine
from the normal operating position.
Note:
Some parts may have already been installed at the
factory.
1
Remove Side Deck Shipping
Strap and Brace
No Parts Required
Procedure
Remove the strap and brace securing the side decks for
shipping.
2
Lowering the Front Deck
Winglets
Parts needed for this procedure:
1 Deck cover R.H.
1 Deck cover L.H.
2 V-Belt
Procedure
1. Remove the nuts securing the front and rear stop bolts
to the right winglet deck mounts (
Figure 3 ).
2. While supporting the right winglet, remove the front
and rear stop bolts from the deck mounts (
Figure
15