Toro 30789, Руководство оператора

Страница: 7 / 41

6
SAFETY INSTRUCTIONS
33. Before disconnecting or performing any work on the
hydraulic system, all pressure in system must be
relieved by stopping engine and lowering implement to
the ground.
34. If the engine must be running to perform
maintenance or an adjustment, keep clear of PTO shaft,
cutting unit blades, and other moving parts.
35. Do not overspeed the engine by changing the
governor settings. Maximum engine speed with no load
is 3300 rpm. To ensure safety and accuracy, have an
Authorized TORO Distributor check maximum engine
speed with a tachometer.
36. Engine must be shut off before checking oil or
adding oil to the crankcase.
37. At the time of manufacture, the machine conformed
to safety standards in effect for riding mowers. To
ensure optimum performance and continued safety
certification of the machine, use genuine TORO
replacement
parts and accessories. Replacement parts
and accessories made by other manufacturers may
result in non–conformance with the safety standards,
and the warranty may be voided.
SAFETY AND INSTRUCTION DECALS
The following safety and instruction decals are mounted on the traction unit. If any decal becomes damaged or
illegible, install a new decal. Part numbers are listed below or in your parts catalog.
NEAR PTO LEVER
(Part No. 27–7290)
ON RADIATOR FAN SHROUD
(Part No. 77–3100)
FORWARD OF TRACTION PEDAL
(Part No. 27–7320)
ON STEERING
COLUMN SUPPORT
(Part No. 82–8940)
ON STEERING
COLUMN SUPPORT
(Part No. 82–8930)
ON RADIATOR FAN SHROUD
(Part No. 76–8750)
ON LIFT ARM AND PUSH ARMS
(Part No. 55–4300)
TRACTION PEDAL