Toro 30604, Руководство оператора

Страница: 15 / 60

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Grease the machine.
2
Warning Decal 1
Used only on machines requiring
European CE compliance.
Media and Additional Parts
Description Qty. Use
Operator's Manual 1 Review before operating machine
Engine Operator's Manual 1 Use to reference engine information
Parts Catalog 1 Use to reference part numbers
Operator Training Materials 1 Review before operating machine
Declaration of conformity 1
Note:
Determine the left and right sides of the machine
from the normal operating position.
1
Greasing the Machine
No Parts Required
Procedure
Before the machine is operated, it must be greased to ensure
proper lubricating characteristics; refer to
Greasing the
Bearings and Bushings (page 38) . Failure to properly grease
the machine will result in premature failure of critical parts.
2
Replacing the Warning Decal
Parts needed for this procedure:
1 Warning Decal
Procedure
On machines requiring European CE compliance, replace
the warning decal, part no. 117–2754 with the warning decal
part no. 117–2766.
15