Toro 30433, Руководство оператора

Страница: 23 / 64

Figure 18
1. Throttle lever 2. Ignition switch
Important:
Make sure fuel shut off valve
is closed before transporting or storing
machine, as fuel leakage may occur. Before
storing machine, pull wire off spark plug(s)
to prevent possibility of accidental starting.
Operating the Neutral Locks
Always set the neutral lock when you stop
the machine. Set the parking brake if it is left
unattended.
Setting the Neutral Lock
1. Squeeze the drive levers back until an increase
in force is felt.
2. Place thumbs on the upper part of the locks
and move them back (Figure 19).
Figure 19
1. Handle 4. Drive lever
2. Neutral lock 5. Full speed forward
3. Neutral position 6. Reverse position
Releasing the Neutral Lock
1. Squeeze the drive levers back until an increase
in force is felt.
2. Place thumbs on the upper part of locks and
move them forward until the pins are in the
forward slot (Figure 20).
Figure 20
1. Handle 4. Pin in full speed forward
2. Neutral lock 5. Handle
3. Drive lever 6. Forward slot
Operating the Mower Blade
Control (PTO)
The blade control knob (PTO) is used in
conjunction with the Operator Presence Control
(OPC) levers to engage and disengage the mower
blades.
23