The red dot appears in the center of the target and
the FNR (forward, neutral, reverse) and Steer voltage
shows 2.5 V prior to allowing the drill to move. If the
red dot travels outside of the outermost black ring,
service or replace the pendant with a new pendant.
The indicators to the right and left of the circle show
the direction of the track travel. The voltages show
a range from 0 to 10.0 V.
Errors and Machine
Information Screens
Drill Errors Screens
To access this screen push button 1 on the Errors and
Machine Information screen.
This screen displays any drill errors.
Use the up and down arrows to scroll through the
errors. Contact your Authorized Service Dealer for
codes that cannot be cleared.
g213168
Figure 80
Engine Errors Screen
To access this screen push button 2 on the Errors and
Machine Information screen.
This screen displays any engine errors.
Use the up and down arrows to scroll through the
errors. Contact your Authorized Service Dealer for
codes that cannot be cleared.
g213170
Figure 81
20
