Toro 23898 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 24

background image

g288049

Figure 62

Information (I/O) Screens

Joystick I/O Screen

Push button 1 on the I/O screen to rotate between the
Drill and Setup options. The icon turns green when
the associated function is actuated.

When the rocker switch on the left control panel is in
the Drill position, the upper left icon turns green and
the joystick voltages can be checked as well as verify
the 2-Speed, and Exit Side Lockout inputs.

When the rocker switch is in the Setup position, the
upper right icon is green. The setup position allows
you to move the machine and prepare for drilling.

g224025

Figure 63

•

The rotary voltage ranges from 0.0 to 8.5 V and
can be present for either make (upper icon) or
break (lower icon) as the selected rotary joystick is
moved.

•

The carriage indicates a voltage range from 0.0 to
10.0 V in the joystick selected direction for thrust
or pullback.

•

The lower left icon indicates the carriage position
of wrench, load, or carriage back as the carriage
moves to the most rearward positions.

•

The lower center icon indicates if the 2-speed
selection of the carriage speed has been selected.

•

The lower right icon indicates the status of the Exit
Side Lockout (ESL). If the indicator is black, the
carriage and rotary actions are inhibited.

Engine I/O Screen

To access this screen push button 2 on the I/O screen.

This screen displays engine information.

g287715

Figure 64

1.

Engine speed (rpm)

6.

Air-filter indicator

2.

Engine-oil pressure

7.

Hydraulic-fluid filter

3.

Battery voltage

8.

Hydraulic-fluid
temperature (not
available)

4.

Engine coolant
temperature

9.

Engine droop

5.

Engine coolant level

Engine speed (rpm) icon:

displays, in steps of 100,

the engine speed (rpm).

Engine-oil pressure icon:

displays the engine-oil

pressure (bar or psi).

Battery voltage icon:

displays the battery voltage.

•

If the engine is shut off, the voltage is measured
by the Toro controller.

•

If the engine is running, the voltage is supplied by
engine controller.

Engine temperature icon:

displays the engine

coolant temperature measured at the reservior. The
temperature drops to 40°F when the engine is shut off.

Engine coolant icon:

displays if the engine coolant

is low.

16

«
...
14
15
16
17
18
...
»

Содержание 23898

























Отзывы:

Нет отзывов

Похожие инструкции для 23898

Бренд: Echo Страницы: 16

Infierno 52/64/80

Бренд: GRILLWORKS Страницы: 12

Бренд: Jata Страницы: 24

Бренд: Napoleon Страницы: 56

Бренд: Skil Страницы: 140

MegaMixer AMX110

Бренд: Intex Страницы: 12

Adventurer A10-603E

Бренд: Magma Страницы: 8

Бренд: Onward Страницы: 24

Бренд: ProFire Страницы: 16

Pit Boss PB550G

Бренд: Navigator Страницы: 70

Бренд: Klarstein Страницы: 24

Бренд: Klarstein Страницы: 48

Бренд: Klarstein Страницы: 44

Бренд: Sparky Group Страницы: 102

Бренд: Hitachi Страницы: 24

Бренд: Hitachi Страницы: 29

Бренд: Hitachi Страницы: 32

Бренд: Hitachi Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды