Moving a Disabled Machine
Whenever the machine is stopped and the engine is not
running, the hydrostatic brakes automatically engage. Do not
attempt to tow the machine if it cannot move under its own
power. If possible, repair the machine at the site. If this is not
possible, use a crane and a spreader bar to lift the machine
onto a trailer, using the lift points shown in
.
Figure 90
Repeat lift points on other side
1.
Lift point
2.
Spreader bar
Replacing the Pipe Holder
1.
Ensure that the 2 upper pins and the 2 lower pins
are installed to secure the pipe inside the pipe holder
(
).
Figure 91
1.
Upper pins
2.
Lower pins
2.
Remove the lower, outer pins on the pipe holder
(
).
Figure 92
1.
Front pin
2.
Rear pin
3.
With a hoist capable of lifting 2,260 kg (5,000 lb),
remove the pipe holder.
76
