125-6142
1.
Exit-side lockout—reset light
14.
Work lights—Off
2.
Exit-side lockout—drill-enabled light
15.
Press and hold to increase engine speed.
3.
Transmitter-battery-status light
16.
Engine speed
4.
Engine—start
17.
Press and hold to decrease engine speed.
5.
Press down to stop the engine; pull up to start the engine.
18.
Mode I—left trigger released, extends pipe gripper toward drill
frame; left trigger pressed, opens lower wrench (stationary
wrench). Mode II—spin drill spindle clockwise.
6.
Reset Zap-Alert system
19.
Mode I—left trigger released, extends pipe gripper toward pipe
holder; left trigger pressed, closes lower wrench (stationary
wrench). Mode II—spin drill spindle counterclockwise.
7.
Zap-Alert system triggered
20.
Mode I—left trigger released, lowers pipe elevator; left
trigger pressed, opens upper wrench (makeup/breakout
wrench). Mode II—left trigger released, extends pipe gripper
toward drill frame; left trigger pressed, opens upper wrench
(makeup/breakout wrench).
8.
Unlock exit-side lockout
21.
Mode I—left trigger released, raises pipe elevator; left
trigger pressed, closes upper wrench (makeup/breakout
wrench). Mode II—left trigger released, extends pipe gripper
toward pipe holder; left trigger pressed, closes upper wrench
(makeup/breakout wrench).
9.
Reset exit-side lockout
22.
With trigger released, rock forward to rotate basket toward
pipe cam, rock backward to rotate basket toward drill frame.
10.
Engage drive movement and setup functions
23.
With trigger released, upper button closes pipe gripper, lower
button opens pipe gripper.
11.
Engage drill carriage movement and other drill functions
24.
With trigger pressed, rock forward to rotate the upper wrench
(makeup/breakout wrench) counterclockwise to loosen a joint;
rock rearward to rotate the upper wrench (makeup/breakout
wrench) clockwise to tighten a joint.
12.
Work lights—On
25.
With trigger pressed, press front or rear button to resume
the previously set auto-drill speed; press and hold the front
button to increase the auto-drill speed; press and hold the
rear button to decrease the auto-drill speed.
13.
Work lights
16
