Toro 22319, Руководство оператора

Страница: 29 / 52

Lubrication
Greasing the Traction Unit
Service Interval: Before each use or daily (Grease
immediately after every washing.)
Grease Type: General-purpose grease.
1. Lower the loader arms and stop the engine. Remove
the key.
2. Clean the grease fittings with a rag.
3. Connect a grease gun to each fitting (Figure 30 and
Figure 31).
Figure 30
Figure 31
4. Pump grease into the fittings until grease begins to
ooze out of the bearings (approximately 3 pumps).
5. Wipe up any excess grease.
Engine Maintenance
Servicing the Air Cleaner
Service Interval: Before each use or daily—Check the
air filter service indicator.
Every 25 hours—Remove air cleaner
cover, clean out debris, and check the
air filter service indicator.
Every 600 hours—Replace the safety
air filter.
Servicing the Air Cleaner Cover and
Body
Important:
Service the air cleaner filter only
when the service indicator shows red (Figure 32).
Changing the air filter before it is necessary only
increases the chance of dirt entering the engine
when the filter is removed.
1. Lower the loader arms, stop the engine, and remove
the key.
2. Open the hood.
3. Check the air cleaner body for damage which could
cause an air leak.. Check the whole intake system
for leaks, damage, or loose hose clamps. Replace of
repair and damaged components.
4. Release the latches on the air cleaner and pull the air
cleaner cover off of the air cleaner body (Figure 32).
Important:
Do not remove the air filters.
G009695
1 2 3 4 5
7 6
Figure 32
1. Air filter service indicator. 5. Air cleaner cover
2. Air filter body 6. Latches
3. Safety filter
7. Dust cap
4. Primary filter
5. Squeeze the dust cap sides to open it and knock the
dust out.
6. Clean the inside of the air cleaner cover with
compressed air.
7. Check the air filter service indicator.
29