Toro 22303 Dingo 320-D, Руководство оператора

Страница: 13 / 40

Product Overview
Figure 5
1. Mount 6. Fuel tank 11. Engine 16. Battery
2. Tilt cylinder 7. Wheel 12. Air lter 17. Indicator lights
3. Auxiliary hydraulic couplers 8. Lift cylinder 13. Control panel 18. Tow valves
4. Loader arms 9. Operator platform 14. Lift points 19. Parking brake lever
5. Front access cover
10. Rear access cover (open)
15. Handle
Controls
Become familiar with all the controls (Figure 6)
before you start the engine and operate the traction
unit.
Figure 6
1. Traction control levers 5. Speed selector lever
2. Attachment lift lever 6. Throttle lever
3. Loader arm lever 7. Key switch
4. Auxiliary hydraulics lever 8. Hour meter
Key Switch
The key switch, used to start and stop the engine,
has three positions: stop, run, and start.
To start the engine, rotate the key to the start
position. Release the key when engine starts and it
will move automatically to the run position.
To stop the engine, rotate the key to the stop
position.
Throttle Lever
Move the control forward to increase the engine
speed and rearward to decrease speed.
Traction Control Levers
To move forward, move the traction control levers
forward. To move rearward, move the traction
control levers rearward.
To go straight, move both traction control levers
equally.
To turn, move the lever located on the side you
want to turn back toward the neutral position
while keeping the other lever engaged.
The farther you move the traction control levers
in either direction, the faster the traction unit will
move in that direction.
13