Toro 22303 Dingo 320-D, Руководство оператора

Страница: 11 / 40

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
Description
Qty. Use
1
Speed selector lever
1
Install the speed selector lever.
2
No parts required
–
Charge and connect the battery.
3
No parts required
–
Check the uid levels.
Step
1
Installing the Speed Selector
Lever
Parts needed for this step:
1 Speed selector lever
Procedure
1. Remove and discard the nut securing the bolt
and washer to the speed selector lever.
2. Secure the lever to the speed selector valve
using the bolt and washer as illustrated in
Figure 3.
Note:
The lever should be installed with the
bend toward the operator.
1
2
G003791
Figure 3
1. Speed selector lever
2. Speed selector valve
11