Toro 1P65F-2 Скачать руководство пользователя страница 115

Страница: 115 / 233

Cylinder Head Cleaning Inspection (continued)

Figure 138

Spark Plug Threads

Exhaust Port

Valve Seats

Coolant Fins

Intake Port

4. Inspect the cylinder head for warpage using a straight edge and feeler gauge.

Measure and compare to specifications:

Service Limit:

0.002 in.

5. Inspect the intake and exhaust ports mounting surface for warpage.

Cylinder Head Valve Seat Inspection

1. Thoroughly clean the cylinder head to remove carbon deposits.

2. Inspect the valve seats for loose seat, proper valve face contact, and proper

seat width.

Standard:

0.028–0.030 in.

Service Limit:

0.040 in.

Figure 139

3. Repeat the inspection for all valves and seats.

1P65F-2 Service Manual

Page 7–17

Compression System: Service and Repairs

3429-270 Rev A

Содержание 1P65F-2










































































































































































































































Результаты поиска

Содержание 1P65F-2

Отзывы:

Toro 1P65F-2, Руководство по обслуживанию, Страница: 115 / 233

Результаты поиска

Содержание 1P65F-2

Отзывы: