Toro 133-0150, Руководство по установке, Страница: 5 / 20

Note:
Use the yellow adapter on the right side
of the machine; use the green adapter on the
left side of the machine. Discard the unused reel
adapter included in the kit.
Note:
Restrain the groomer shaft with the
adapter wrench tool (Part No. 137-0921, sold
separately) on the wrench flats on the back side
of the groomer drive box (
Figure 7 ).
g284543
Figure 7
Right side shown
1. Wrench flats (1-3/8 inches) 3. Adapter wrench (Part No.
137-0921)
2. Hex socket (reel adapter)
3. Secure the weight bracket to the reel using 2
hex-socket, button-head bolts (3/8 x 3/4 inch)
as shown in
Figure 8 .
Note:
Attach the weight bracket to the side of
the reel where you intend to mount the groomer
drive box.
g227902
Figure 8
Left side shown
1. Weight bracket 4. Thread-locking compound
2. Hex-socket, button-head
bolt—3/8 x 3/4 inch (2) 5. Hex-head (Torque to 135
to 150 N∙m (100 to 110
ft-lb))
3. Groomer drive box (left
drive shown)
4. Apply medium-strength thread-locking
compound (such as Blue Loctite® 243) to the
threads of the internal reel shaft (
Figure 8 ).
5. Attach the groomer drive box to the reel shaft
(
Figure 8 ) using the hex-head on the groomer
drive box.
Important:
The reel threads on the left side
of the cutting unit are left-handed, and the
reel threads on the right side of the cutting
unit are right-handed.
6. Restrain the reel for installation; refer to
Restraining the Reel for Installing Threaded
Inserts (page 19)
.
7. Torque the hex-head to 135 to 150 N∙m (100 to
110 ft-lb).
Important:
You must use a 6-point socket
with heavy wall.
Important:
Do not use an impact wrench for
this step.
Important:
Allow the thread-locking
compound to cure for 15 minutes before
continuing the procedure.
5