Toro 131-3302, Руководство по установке

Страница: 2 / 8

1
Installing the
Drive-Shaft-Shield Bracket
on the Sprayer Pump
Parts needed for this procedure:
1 Drive-shaft-shield bracket
Procedure
1. Remove the 2 bolts at the left and right of the input
shaft of the sprayer pump (
Figure 1 ).
Figure 1
1. Bolts
2. Apply medium-duty thread-locking compound to the
bolts.
3. Install the drive-shaft-shield bracket onto the sprayer
pump with the 2 bolts removed in step
1 as shown in
Figure 2 .
Figure 2
1. Drive-shaft-shield bracket 2. Bolts from the sprayer
pump
4. Torque the bolts to 23 to 26 N-m (17 to 21 ft-lb).
2
Install the PTO Shaft and
the Drive-Shaft Shield to the
Sprayer Pump
Parts needed for this procedure:
1 PTO drive shaft
1 Woodruff key
2 Set screw
1 Drive-shaft shield
2 Clip
2 Flange-head bolt (1/4 x 3/4 inch)
Procedure
1. Insert the Woodruff key into the key slot in the shaft
of the sprayer pump.
2