Toro 08731, Руководство оператора

Страница: 8 / 16

Figure 13
1. Lever assembly 3. Bolt (5/16 x 2 inches)
2. Pivot tube 4. Locknut (5/16 inch)
2. Loosely install the center hole of the pivot tab to the
pivot bracket on the toolbar using a bolt (5/16 x 1
inch) and a locknut (5/16 inch) (Figure 14).
5
1
2
4
3
G004103
Figure 14
1. Pivot tab
4. Bolt (5/16 x 1 inch)
2. Pivot bracket 5. Locknut (5/16 inch)
3. Toolbar
3. Slide the end of the toolbar link over the short post on
the pedal lever assembly, and secure it with a retaining
ring (Figure 15).
Figure 15
1. Toolbar link 4. Retaining ring
2. Pedal lever assembly 5. Washer (7/8 inch)
3. Lever assembly
4. Install the post on the other end of the pedal lever
assembly through the top of the lever assembly, and
secure it using a washer (7/8 inch) and a retaining ring
(Figure 15).
5. With the lift pedal assembly knee bent upwards, install
the square hole on the pivot tab to the end of the
toolbar link using a carriage bolt (3/8 x 1-1/4 inches),
a spacer, a washer (1 inch), a washer (13/16 inch), and
a locknut (3/8 inch) as shown in Figure 16.
8