Toro 08731, Руководство оператора

Страница: 7 / 16

Figure 11
1. Toolbar 3. Fourth tooth
2. Pivot bracket 4. Tooth mounting hardware
1. Position each end of the attachment tube onto the
saddles.
Note:
The cutting edges of the tines should point
forward.
2. Move the lift handle to the middle position.
3. Secure the front of each saddle to the tube assembly
with a bolt (5/16 x 1 inch) and a locknut (5/16 inch)
(Figure 12).
Figure 12
1. Saddle 2. Attachment tube
7
Installing the Toolbar Lift Pedal
Parts needed for this procedure:
1 Lever assembly
1 Bolt (5/16 x 2 inches)
3 Locknut (5/16 inch)
1 Pivot tab
1 Toolbar link
1 Carriage bolt (3/8 x 1-1/4 inches)
1 Spacer
1 Washer (1 inch)
1 Locknut (3/8 inch)
1 Pedal lever assembly
2 Retaining ring
1 Washer (7/8 inch)
1 Bolt (5/16 x 1 inch)
1 Eccentric bolt
Procedure
1. Slide the post on the lever assembly into the left end
of the pivot tube, and secure it with a bolt (5/16 x 2
inches) and a locknut (5/16 inch) through the pivot
tube (Figure 13).
Note:
You may need to thread the bolt through the
pivot tube and the lever assembly.
7