Toro 07068, Руководство оператора

Страница: 28 / 36

Lubrication
Service Interval: Every 50 hours
The sweeper has 11 grease fittings that require lubrication
with No. 2 lithium grease. If the machine is operated
under normal conditions, lubricate all bearings and bushings
immediately after every washing. Lubricate the bearings
and bushings daily when operating conditions are extremely
dusty and dirty. Dusty and dirty operating conditions could
cause dirt to get into the bearings and bushings, resulting in
accelerated wear.
1. Lubricate the following grease fittings:
•
Hopper pivot (upper) (2) ( Figure 32 ).
•
Brush pivot (2) ( Figure 33 ).
•
Lift cylinder (2) ( Figure 34 ).
•
Hopper pivot (lower) (2) ( Figure 35 ).
•
Hitch tongue pivot (1) ( Figure 36 ).
•
Windrow blade mount ( Figure 37 ).
•
Windrow blade hub ( Figure 37 ).
2. Wipe grease fittings clean so thatforeign matter cannot
be forced into the bearing or bushing.
3. Pump grease into the bearing or bushing.
4. Wipe up excess grease.
Figure 32
Figure 33
Figure 34
Figure 35
Figure 36
28