Toro 07068, Руководство оператора

Страница: 15 / 36

4. Secure the other end of the chain to the slot in the
frame with the snap link (
Figure 15 ).
Note:
There should be some slack in the chain when
connected.
5. Grease the fitting on the blade mounting assembly and
on the windrow blade hub with No. 2 lithium grease.
Note:
When the windrow is not required, unhook the
chain from the snap link, pivot the windrow assembly
upward, and hook the chain at the raised level.
Figure 15
1. Bolt (7/16 x 3-3/4 inches) 8. Windrow blade
2. Small washer (1/2 inch) 9. Spacer
3. Sweeper frame 10. Bolt (3/8 x 1-1/4 inches)
4. Large washer 11. Chain
5. Blade-mount assembly
12. Flange nut (3/8 inch)
6. Lock nut (7/16 inch) 13. Snap link
7. Bolt (7/16 x 3-1/4 inches)
15